Skip to main content
    Performance Footing® — premium equestrian arena footing

    Rubber Rails

    A clean, substantial edge that keeps footing in place

    Define your arena perimeter with ground-level black rubber rails. Contain loose footing and replace timber groundboards without wood rot, splinters or painted-lumber upkeep.

    • 3.28 ft per section
    • Nearly 8 inches high
    • No wood rot or wood splinters
    $59.95per rail section

    Approximately $18.27 / linear ft

    Total $59.95

    Freight deposit and tax calculated at checkout. Rails only; anchoring hardware is not included.

    EDGE rubber border containing arena footing with visible joints and holes — AI-enhanced installation photo

    Benefits of Rubber Rails

    Defined footing perimeter

    A nearly 8-inch ground-level border frames arenas, pens and schooling spaces.

    No timber upkeep

    Black rubber means no wood rot, wood splinters or painted-lumber touch-ups.

    Measured to your layout

    Plan straight or circular runs and subtract gate openings before ordering.

    Original side-detail photo of EDGE rubber border showing textured face and section joint

    A finished perimeter

    Frame the arena. Keep the footing contained.

    Create a defined black outline for new builds or existing arenas. Rails serve as ground-level footing containment, not horse fencing or full-height wall protection.

    Stacked EDGE rubber border sections on a pallet — AI-enhanced supplied factory photo

    Installation details

    Plan joints, gates and anchors

    Confirm corners and surface-specific anchoring before installation. Soil, concrete and asphalt need different fastening details. The optional stake package remains unavailable until compatibility is confirmed.

    Frequently Asked Questions

    Plan your order

    How many rubber rails do you need?

    Measure your perimeter and subtract gate openings for a whole-section estimate.

    Rails only. Confirm surface-specific anchoring separately.

    Your border order

    Border length needed
    80.00 linear ft
    Cutting allowance
    5%
    Recommended quantity
    26 sections
    Coverage supplied
    85.30 linear ft
    Price per section
    $59.95
    Equivalent material price
    ≈ $18.27/linear ft
    Product total
    $1,558.70

    Estimated material quantity, not a cutting plan. Check corners, curves, sheet layout and usable offcuts before ordering.

    Destination-based freight and tax are shown before payment. Installation is additional.

    Ask about corners and anchoring

    Technical Specs

    View the full spec sheet

    Every test result, dimension, and material property in one downloadable view.